15A 1.5 1.0 mm Power Wire M20 3 Pin Panel Mount Screw Version Cable Connector Waterproof IP67 IP68
This cable connector waterproof is a pair of waterproof plug and sockets that the male is in-line connector and female is panel mount connector. The wire installation is screw lug, which is convenient for the wire installation that is no need more tools than a screwdriver. This connector is assembled with some components. The male connector is included waterproof nut, rubbere seal ring, enclosure, coupling nut, O-ring, and male connector core. While the female panel plug is included female connector core, hex nut, and gasket. Except the rubber seal ring and O-ring, the plastic of cable connector waterproof is nylon PA66 injection, And the metal is gilded brass.
Parameter
Voltage | 300V |
Current | 15A |
Wire Gauge | ≤1.5mm² |
Cable Jacket | 5.0-10mm |
Mechanical Life | 3000 mating cycles |
Operating Temperature | -40℃~+105℃ |
Waterproof Level | IP67 / IP68 |
Seal Ring | 6.5/7.5/8.5/9.5/10mm |
Part number
Part Number
For this connector, there is dust caps male or female for the connector to proof dust once the connector is unplugging. The dust cap with orange gasket is used for the panel mount connector (female), and another one dust cap is used to the male connector.
How to choose and confirm the right cable connector waterproof for your power cable solution?
In general, when the cable wire will go through the panel and connect to the PCB inside the control box, it need a panel mount connector. Actually, the meaning of panel mount connector is in order to mount the cable on box and achieve waterproof effect. In this way, it need to confirm the cable connector waterproof, its waterproof grade is IP65, IP67 or IP68, which is depended on your requirement according to the actual application.
Now that have choosing the panel connector, it need to confirm the connector to be mounted on panel, is it male side or female side? How to confirm it? As usual, the male connector is used for input cable and the female connector is used for output cable.
And then it need to confirm the panel connector is front panel mount or rear panel mount. The details is that the hex nut of front panel mount connector is in front of the panel but the hext nut of rear panel mount connector is in behind of panel (it mean inside box).
What should be confirmed next is the power supply on cable connector. The power is determined the connector size. The higher current will require bigger size connector. Such as 10A, this M20 3 pin connector is enough for this power. Once confirmed the power, you can confirm the wire gauge.
At last, it need to confirm the cable jacket overall diameter according to the cable wire you choosed. The cable jacket to confirm ensure the cable pass through the rubber seal ring, then will achieve more waterproof effect.
If you can not confirm the details, please confirm our sales to get more helps, molly@aohuadz.com.
Please read on, stay posted, subscribe, and we welcome you to tell us what you