AHUA Male Female Assembly Waterproof 2pin M12 Panel Mount Connector for Junction Box
- M12 panel mount connector is wire to panel connector, the male connector is panel mount type plug, female connector is inline connectors. This is solder type connection, which is require Auxiliary for welding.
- Male: the components include male core, hex-nut, shim. This M12 panel mount connector is front panel mount on the junction box panel, that mean the male connector will go through the panel hole, then the hex-nut will be in front of the panel and mount it on.
- Female: the components include female core, housing, seal ring, middle nut, overall ring. That is solder to cable and mating to the male panel connector.
Parameter of M12 panel mount connector
- Material: nylon PA66
- Hardware fitting: gold plated copper
- Connection: solder type
- Required tool for installation: Tin bar and electric soldering iron.
Male | AH-M12-0502FMR01112 |
Female | AH-M12-0502MFZ01112 |
Contacts | 2pin |
Voltage | 300V |
Current | 5A |
Wire Gauge | ≤1.0mm² |
Cable OD | 3.5mm~7.5mm |
Mechanical Life | 3000 mating cycles |
Operating Rating | -40℃~105℃ |
Waterproof Level | IP67 / IP68 |
Seal Ring | 9*9*3.6/4.1/5.5/6.5/7.5mm |
M12 panel mount connector, there are dust caps for male and female when needed.
How to choosing the right panel mount connector? Please make details clear below:
- What is the wire gauge and cable overal diameter?
- Male panel mount or female panel mount?
- Front panel mount or rear panel mount?
If can not confirm the front panel mount or rear panel mount, please contact AOHUA sales for confirmation.