What kind of connector harness made in AOHUA

What kind of connector harness made in AOHUA

Connector harness is an electrical wiring primitive, which is essentially a container to group various wire or single wire together to form a harness including connector.

In AOHUA, what connector harness we make is the plug connector with wire, it also refers to wire terminal. Especially the connector we make are including the waterproof connector, cable gland, and plug connector (wire terminal). The waterproof connector for cable harness are panel type connectors, the plug connector is the same as wire terminal in the market, such as XH terminal connector or PH terminal connector, and so on. And the cable gland is designed for the end of the wire harness as usual. This article will focus on these three types of connector harness.

1. Connector harness-panel type waterproof connectors

Our panel type connector harness is designed with electrical single wire, which is solder the wire on the panel plug in fact. From the clients' perspective, it will save a lot of time and money if we can solder the wire before shipment.

2. Connector harness-wire terminal connector

Indeed, the single wire to connect to PCB will require soldering, but in fact, the welding spot is small and limited, and it is difficult to solder the wire in a small PCB panel usually. So the wire terminal connector is much welcome in the application. The bare wire is installed with terminal before shipment, it will save much time for most of clients. These wire terminal connectors are too many, such as JST XH terminal, PH terminal, Molex terminal, even ACU Z18 connector, and so on. No matter what kind of terminal connector, it would be better if assembly it one the wire cable before shipment. In this way, our customer will not need to assembly it in their factory.

3. Connector harness-cable gland

The cable gland usually mount the panel hole or device for stretching resistance. To the cable through the panel hole, it is designed according to the hole size and cable outer diameter, so that it is no standard size. Different hole size with different cable gland, and usually different cable diameter will different cable gland. It is the same requirement of hole size that the cable gland use to device, which is designed the cable gland for strain relief between cable and device. How to design a right cable gland? Firstly, it need to confirm the wire gauge and cable OD; then to confirm the hole size on control box or device. Second, confirming the strain relief requirement according to the real application. Final, make sure the outline of cable gland and to choose the suitable designer to make the drawing. This is a designed and customized products, it will be better if you can discussed with designer.

Surely, what matter kinds of connector harness will be made, all both to solve installation and space problems of cable layout. In AOHUA, making waterproof cable connector harness, it is the fact that as referred to cable harness processing in fact, only we focus on waterproof connectors.

As a professional manufacturer, we can design and customize various of cable connector harness, choosing AOHUA will be your victory. aohuadz.com