AOHUA electric device over molded malef female cable joint 4 pin M12-panel-waterproof-connectors

AOHUA electric device over molded malef female cable joint 4 pin M12-panel-waterproof-connectors

M12 panel waterproof connectors are designed according to the wire to wire connector, which is the same screw threads.  The male connector is bulkhead and front panel mount plug molded with cable, the female is assembly connector or molded cable connector with cable. The assembly or molded female connectors is the same screw thread, which is compatible.

• The connector size of M12 panel waterproof connectors, male is 45mm*18mm， female is 40mm*16mm, which is the connector size not including the cable length. The cable length is customized as requirement from customers, the shortest cable to be molded is 50mm. 
• The components of M12 panel waterproof connectors, the male includes male connector with cable, gasket, hex nut; the assembly female includes female core, housing, end nut, middle nut, silicone seal ring, rubber seal ring; or the molded female includes female connector with cable. 
• The material of M12 panel waterproof connectors. Male is nylon connector with PVC cable, the assembly female connector is nylon PA66 or the molded female is nylon connector with PVC cable. Due to the M12 waterproof connector is mini connector and this is 4pin connector, which is only carry no more than 4amps power, the cable we used in usual is 2464 UL PVC cable, such as 4*20AWG, 4*22AWG, 4*24AWG. 

• The parameter of M12 panel waterproof connector.

• The DRAWING of M12 panel waterproof connectors

• Application of M12 panel waterproof connectors. The panel waterproof connector mainly use to junction box in various of electric device or lighting controller. Such as DMX cotroller, electrical PCB control box, Sensor control system, and so on.