AOHUA IP67 panel mount Ethernet cat6 568B FLUKE passed cable waterproof RJ45 connector

AOHUA IP67 panel mount Ethernet cat6 568B FLUKE passed cable waterproof RJ45 connector

AOHUA is majoring in waterproof connectors with more than 16 years' experience. There are many main products in our company, but today we would like to talk about the waterproof RJ45 connectors, which are used for internet connection. They are only playing the role of accessories in cable connector industries.

Usually, you might reply on internet and can be easily met by WiFi network, as like most people. But in some scenarios, you might want to use Ethernet connection waterproof with RJ45 connector to the outdoor area or outbuilding long Ethernet run. In that case, you need a wired connection for more reliable and less prone to interference, also need a waterproof connector that can stand up to elements. And for the long Ethernet run, you will commonly need to link two or more cables. At the same time, due to the weight of long cable, it need to mount on the wall or panel.

The best waterproof RJ45 connector for Ethernet Wire

This waterproof RJ45 connector is panel mount connector for Ethernet wire, which is applying to data transfer. The connector is assembled with cable, which is CAT6 non-shielded 568B FLUKE data wire. The cable length can be customized as usual. The connector overall size is 68mm length. Its weight is about 0.03kg per set, is so lightweight, which won't drag down the cable if without zip tied down. The connector one side has a male screw thread on the outside, and the other side is terminal with cat6 cable.

Here, we have to talk about the how to assembly waterproof RJ45 connector and how to install your cables. You only need to disconnect all of the parts, run your cable through and plug the tips into, then screw it all back together. That is all you need to do.