Waterproof T Type Cable Splitter
This T type cable splitter is molding splitter with electrical wires. The main unit is T splitter, that is 1 input and 2 output. Usually, the solution is customized as the requirement from clients. The solution of T type cable splitter is included 1 unit or many units. The cable length is also customized according to the requirement.
In this products, the T splitter is TP04 splitter. The size of splitter is attached below. Generally, the main cable is no larger than 1.5mm²,OD8.3mm; the branch cable is no larger than 1.0mm² OD6.8mm. This T type cable splitter, can mold with 2 pin, 3 pin and 4 pin cable. From the start, please tell the current rating, wire size, cable length and the quantity of T splitter units, then our engineer will design and make the CAD drawing for confirmation.
PINs | Part Number | Main Cable Wire Gauge | Main Cable OD | Branch Cable Wire Gauge | Branch Cable OD |
2 | AH-TP04-020X | ≤1.5mm² | 8.3mm | ≤1.0mm² | 6.8mm |
3 | AH-TP04-030X | ≤1.5mm² | 8.3mm | ≤1.0mm² | 6.8mm |
4 | AH-TP04-040X | ≤1.5mm² | 8.3mm | ≤1.0mm² | 6.8mm |
Except the above scheme, the T type cable splitter also can design with waterproof connector. For instance, the main cable mold with male connector, the branch cable mold with female connector. Meanwhile, it can design with different waterproof connector, besides the male female connector, includes L type connector, panel connector and so on.
For more solutions design, please contact aohuadz.com, AOHUA professional team will give the satisfactory scheme.
Please read on, stay posted, subscribe, and we welcome you to tell us what you