Outdoor Electrical Electronic Power Wiring Distributor 15A 2pin Fast Push Wire Locking IP68 Assembly T Shape Waterproof Connector

This is T shape waterproof connector distributor, which is assembly type that is coming with push-wire handles.

Part Number 

AH-M20-1502T02132

1. Contacts: 2pin
2. Plastic material: PA66
3. Conductor: copper
4. Waterproof sealing: silicone rubber

Specification

• Rated Voltage: 300V
• Rated Current: 15A
• Wire Gauge: ≤1.5mm²
• Cable OD: 5.5-10mm
• Operating Temperature: -40℃~+105℃
• Waterproof Grade: IP68
• Seal ring: φ6.5, φ7.5, φ8.5, φ9.5, φ10 mm

Components of connector

1. waterproof nut;
2. cable gland(seal ring);
3. enclosure;
4. O-ring
5. T connector core;

How to do wiring operation?

1. You can prepare the cable wire with open wire end, do stripping about 7mm;
2. As the picture, you can take off the waterproof nut, cable gland, enclosure firstly;
3. Then insert the wire through components order: from waterproof nut, to cable gland, to enclosure, reach the connector core;
4. Open the handle, insert the wire and then turn the handle to original position;
5. You can assembly all components tightly and then that is ready.

How to choose a right waterproof connector for your cable wires joint?

1. confirm the connector type, such as T connector or X connector you need;
2. you can choose the waterproof connector with different connection type, such as, screw fixing type, push-wire locking type;
3. specify the working ampere, wire gauge, and cable OD, then confirm which model is OK for your cable.
4. in order to ensure what the connector you choose is right, you can send all details to sales team, we will double check it whether is OK.

Surely, you can contact to our sales for getting better price for your mass order, all can be negotiated with AOHUA.