Power Supply 1 Cable Divided Into 2 Cables Wire Joint Assembly Electrical Waterproof Connector 2pin Screw Fixing Type

Here introduce the assembly type waterproof connector 2pin distributor. This connector is a PCB structure molded with plastic, carrying with screws and housing. It is very easy for power divided into 2 cables. (Total 3 type connectors of this model: 1 to 2, 1 to 3, 1 to 3.)

Specifications

1. Model: M16
2. Contacts: 2pin
3. Voltage Rated: 300V
4. Current Rated: 10A
5. Wire Size: ≤1.5mm²
6. Cable OD: 5-10mm
7. Operating Temperature: -40℃~+105℃
8. Waterproof Grade: IP67/IP68
9. Tools for operation: screwdriver

How to do wiring operation?

1. stripping cable jacket length about 15mm, wire insulation length about 5mm;
2. Unscrew the components includes: waterproof nut, seal ring, enclosure.
3. Insert the wire through waterproof nut, seal ring and enclosure.
4. Loosen the screws with screwdriver;
5. Insert the wire to terminal, then tighten the screws.
6. Twist enclosure waterproof nut tightly.

How to order:

Please specify below information:

1. contacts and models
2. working ampere
3. wire size and cable OD
4. quantity to order