How to order?

Please provide power and wire details includes:

1. pin number, eg: 2 pin;
2. connector type, eg: connector with wire end or extension cable;
3. working ampere and voltage, eg: 10A, 220V;
4. wire gauge and cable length, eg: 2*1.5mm², length 300mm;
5. cable material, eg: rubber cable;

Other requirement are also OK, please write us information with requirements, we will get backt to you with drawing and price within 12 hours. 

2 PIN Wire Male Female Connector 

This is M19 thread PVC injection connector with cable. The plastic of connector is PVC complete. The pin is diameter φ2.35mm, which is suitbale for the power no more than 12A / 250V, the fitting wire gauge is 1.5mm² and 1.0mm². And the cable jacket OD for injection is 6.0-8.3mm. 

This wire male female connector is molded with cable, there are PVC, PUR, rubber cables for choices. The female connector is panel mount type, which is suitable for mounted on panel box. The female connector is rear panel mount, and it will be required the female cable go through the panel hole and the hex nut behind the panel to tight.

There is dust cap for female connector to choose from, not standard. 

• Contacts: 2 positon
• Pin Diameter: φ2.35mm
• Rated Voltage: 250V
• Rated Current: 12A
• Wire Gauge: ≤ 1.5mm²
• Cable Jacket OD: 6.0-8.3mm
• Mechanical Life: 500 mating cycles
• Operating Temperature: -20℃~+80℃
• Waterproof Level: IP65